
Add to Cart
Single Position Three Phase Electricity Meter Box IP54 With Hinges , Lock And Key
The CAM368-K1 Series Meter Box range is specifically designed for harsh African conditions and has a solution tailored for every location. The generous wiring room and well-located cable knockouts allow for a quick fit-off, every time. Meter Boxes come with a specially-designed hinged door, which can be removed for long bouts of maintenance or eventual door replacement. The ventilation louvers give them an IP54 rating, providing more than adequate protection from larger objects and direct water sprays into the enclosures.
The full body covered design provides maximum security as well as safety to not only field technicians but also ordinary consumers, making the box immune to any tamper or illegal intrusion. This box type has been awarded contract in thousands of pieces in African tenders.
FUNCTIONS AND FEATURES:
• Compliant with BS5685 footprint mounting standards
• Flame resistant and fire retardant
• For both prepaid and smart meter
• 1P 20-60A MCB
• Easy clean and maitenance
• IP 54 protection rating
• With hinges, lock and key
User Benefit
1. Fully covered design offers maximum security
2. Folded edges for user safety protection and cable damage reduction
3. Meter box door is removable and double-hinged for easy repairing and replacement
4. Climate safe and corrosion free
5. Rust protection and quality finish
Specifications:
Material | PC+10%GF |
Display Window | Transparent |
Keypad Operation |
Operable (operation can be disabled upon utility’s order request) |
Safety Protection |
Operable breakers inside box |
Flame-Resistance |
Comply with requirements of 960℃ glow-wire test as per IEC60695-2-1 |
Fire Resistance Test |
UL94-V0 Rated@1.5mm |
Meter Installation |
BS 5685 |
Insulation Level |
No flashover and breakdown phenomenon under 50/60Hz sine wave 2000V/min |
Heat Dissipation |
Ventilation holes for cooling |
Tamper Protection |
Sealable with wire security seals |
Climate Effect |
Meter box won't crack and deform under the below temperature changes: |
Compression |
Meter box won't crack and be damaged when a weight of 100kg with an area of 10×10cm² is put on the display window or any position for 3 minutes |
Impact Resistance |
With fixed screws tightening on the meter box, do the free-fall test from a height of 2m, the meter box is intact and shock resistant |