
Add to Cart
Malawi STS Split Keypad Water Prepaid Meters with RF communication
CA568 is a multi-jet dry type, prepaid water meter approved by STS Association in South Africa. The meter works with a low power motor driven ball that is able to open and shut for 4 million times during battery lifetime. It can automaticallly turns off or changes into dripping mode once credits drain up.
CA568 series assure you of continuously good metrology and revenue protection at the same time.The electronic part of the meter is coated with water proof shield and sealed above on the metering chamber, which makes the meter water proof and adaptable to humid and tropical environments.
To top-up or recharge the water meter, a consumer just need to purchase 20 digits' credit token from the vendor and punch in the code with the CIU. Officer can generated the TOKEN from our billing system.
Features
a) Size wise from DN15 up to DN150
b) STS standard compliant
c) Split operation with a CIU keypad
d) 300 meters wireless connection range between CIU and the meter
e) Valve turns off for zero credit and tamper
f) Coated electronics making meter water resistant in humid and tropical environments
g) Free unregulated band for communication
h) Low credit alarm,overdraft programmable
i) Data retention in absence of power
j) Support drive-by and AMR reading
Key benefits
1) Quick money back and improved cash flow management
2) Support Airtel, MPESA, MTN, TIGO, mobile money payment
3) Meter shuts off when credit finishes
4) Easy setting for tariff, overdraf, low credit warning level
5) Easy to install and retrofitt
6) Remote reading and valve control on / off
Specifications:
Nominal size |
Dn |
mm |
in-line |
||
15 |
20 |
25 |
|||
Maximum flow rate |
Q4 |
m3/h |
3.125 |
5.0 |
7.875 |
Ratio “R” |
Q3/Q1 |
|
80 |
80 |
80 |
Permanent l flow rate |
Q33 |
m3/h |
2.5 |
4.0 |
6.3 |
Transitional flow rate |
Q22 |
0.05 |
0.08 |
0.126 |
|
Minimum flow rate |
Q11 |
0.031 |
0.05 |
0.0787 |
|
Minimum reading |
m3 |
0.0005 |
|||
Maximum reading |
99999 |
Maximum Permission Error (MPE)
Q1≦Q≦,Q2 MPE =+ 5% Q2≦Q≦Q4, MPE= + 2% (For hot water metering, MPE=+ 3%)
Dimensions and diagram
Nominal size |
Length |
Width |
Height |
Thread |
mm |
D |
|||
15 |
165 |
101 |
124 |
G3/4B |
20 |
195 |
101 |
124 |
G1B |
25 |
225 |
101 |
124 |
G5/4B |