Shenzhen Calinmeter Co,.LTD
the only legal owner of CALIN brand and the sole manufacturer of Calin series utility meters. Calinmeter reserve the right to pursue any legal remedies from Anyone or entity who claims as the group or
Add to Cart
4G GPRS STS Prepaid Prepayment Meter Three Phase DLMS compliant
STS Keypad Prepaid Prepayment Meter Three Phase For Main Grid
The CA368 is designed for high-power solar Mini Grid or main line measurement. The CA368 is BS footprint and three phase four wires meter, which can bear 10 A to 100 A current, the voltage of each phase is 230V (60%~120% Un). Furthermore, the CA368 is designed as STS keypad prepaid meter, operating the prepaid function based on the 20 digits STS Token, the meter will shut off the power automatically when the user consume all credits in the meter.
Built in a RF communication module for the CA368, will lead to the CA368 can support to developing a AMR management system. The data concentrator collect the data from nearby RF three phase prepaid smart meters by RF communication, and then upload the data to our cloud server by GPRS. You can remotely reading and monitoring the meters, and also can switch on/off the relay remotely.
Main Features
• Compliance with STS (Standard Transfer Specification)
• DLMS compliant
• Automatically shut off power when Credit be used up
• Power limit and low credit warning can be programed flexibly.
• Tamper detection and event record such as opening cover, reverse connection, black-out
• Dual power source working on both prepayment and credit mode
• Maximum demand measurement and load profiling (on request)
User Benefit
• BS footprint, easy to install
• Low operational and maintenance cost
• PLC/ RF/ GPRS/GSM communication for AMR/AM I features on your request
• Meter provides various valuable information by punching in Calin's shortcodes
Specifications:
| Electrical parameters: | |
| Nominal voltage Un | 3x240 vol |
| Limited voltage | 60~120%Un |
| Frequency | 50/60Hz+5% |
| Basic current(Ib) | 10A |
| Maximum current(Imax) | 100A |
| Starting current(Ist) | 30mA |
| Active energy constant | 400imp/kWh |
| Accuracy |
|
| Active energy to IEC62053‐21 | Class1.0 |
| Reactive energy to IEC62053‐23 | Class2.0 |
| Power Consumption |
|
| Power consumption in Voltage circuit | <2W <8VA |
| Power consumption in current circuit | <1VA |
| Temperature range |
|
| Operation meter | 25 to+70℃ |
| Storage | 40℃ to+85℃ |
|
| |
| Insulation strength | |
| AC Insulation strength | 4kV at 50Hz during 1min |
| Impulse voltage 1.2/50μs mains connections | 8kV |
|
|
|
| Electro Magnetic Compatibility | |
| Electrostatic discharges |
|
| Contact discharge | 8kV |
| Air discharge | 16kV |
| Electromagnetic RF fields |
|
| 27MHz to 500MHz typical | 10V/m |
| 100kHz to 1GHz typical | 30V/m |
| Fast transient burst test | 4kV |
| Mechanical requirements |
|
| Protection Rating | IP54 |
| Insulation Classification | Protective Class II |
| Maximum cable size | 10 mm |
